91
9N,2N,8N, Ford Tractors / Ford 2N
« on: May 27, 2008, 07:11:28 AM »
Gramps finds time to give his grandson a ride on the old Ford 2N.
9NFord.com Message Board and Forums for 9N, 2N, 8N
Show Posts
This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.
Gramps finds time to give his grandson a ride on the old Ford 2N.
93
9N,2N,8N, Ford Tractors / mega collection tractors
« on: March 05, 2007, 02:06:25 PM »
bject: mega collection tractors
Name: farmersbase
Date Posted: Feb 13, 07 - 9:45 AM
IP Address: 90.128.159.18
Email: farmersbase@tele2.nl
Website http://www.farmersbase.com
Message: here a message from the netherlands, from farmersbase
we do not own such a nice tractor as the 9Nford,
BUT we can show you our MEGA COLLECTION of tractors at:
www.farmersbase.com
be wellcome at
http://www.farmersbase.com
farmersbase@tele2.nl
doeleman&bros
netherlands
Name: farmersbase
Date Posted: Feb 13, 07 - 9:45 AM
IP Address: 90.128.159.18
Email: farmersbase@tele2.nl
Website http://www.farmersbase.com
Message: here a message from the netherlands, from farmersbase
we do not own such a nice tractor as the 9Nford,
BUT we can show you our MEGA COLLECTION of tractors at:
www.farmersbase.com
be wellcome at
http://www.farmersbase.com
farmersbase@tele2.nl
doeleman&bros
netherlands
94
9N,2N,8N, Ford Tractors / serial number and year
« on: March 05, 2007, 02:04:58 PM »
Subject: serial number and year
Name: todd
Date Posted: Dec 9, 06 - 5:41 PM
IP Address: 68.106.175.15
Email: ktkerr@cox.net
Message: trying to determine the year of a 9N tractor. the serial number is 271873. can someone determine this for me?
Name: todd
Date Posted: Dec 9, 06 - 5:41 PM
IP Address: 68.106.175.15
Email: ktkerr@cox.net
Message: trying to determine the year of a 9N tractor. the serial number is 271873. can someone determine this for me?
95
9N,2N,8N, Ford Tractors / 9n Tires
« on: March 05, 2007, 02:03:46 PM »
Subject:
Name: Roger
Date Posted: Oct 18, 06 - 11:58 AM
IP Address: 64.74.182.130
Email: farleymcluth@yahoo.com
Message: I have an early 1939 9n with 36"X9" rear tires which are so weathered the tubes bulge out of the cracks. I'm trying to find a good used pair of tires and tubes. Any leads would be appriciated.I've tried "Dicks Used Tractor Tires" but no luck.
Name: Roger
Date Posted: Oct 18, 06 - 11:58 AM
IP Address: 64.74.182.130
Email: farleymcluth@yahoo.com
Message: I have an early 1939 9n with 36"X9" rear tires which are so weathered the tubes bulge out of the cracks. I'm trying to find a good used pair of tires and tubes. Any leads would be appriciated.I've tried "Dicks Used Tractor Tires" but no luck.
96
9N,2N,8N, Ford Tractors / 9N + or - ground?
« on: March 05, 2007, 02:02:19 PM »
Subject: 9N + or - ground?
Name: i967mustang
Date Posted: Oct 14, 06 - 7:42 PM
IP Address: 69.249.37.61
Email: i967mustang@hotmail.com
Message: I have been working on this tractor for almost a year, finally got it done and running. Now I'm not sure if it is supposed to be positive or negative ground. Right now I have it hooked up Negative ground and it starts and runs, but should it be positve ground? What will happen if I just switch the battery around? Thanks, John
Name: i967mustang
Date Posted: Oct 14, 06 - 7:42 PM
IP Address: 69.249.37.61
Email: i967mustang@hotmail.com
Message: I have been working on this tractor for almost a year, finally got it done and running. Now I'm not sure if it is supposed to be positive or negative ground. Right now I have it hooked up Negative ground and it starts and runs, but should it be positve ground? What will happen if I just switch the battery around? Thanks, John
97
9N,2N,8N, Ford Tractors / 9n generator
« on: March 05, 2007, 02:01:28 PM »
Subject: 9n generator
Name: Jeff Pinnow
Date Posted: Sep 21, 06 - 2:26 PM
IP Address: 69.19.167.97
Email: sharkey@dm-tech.net
Message: I Just bought a 9n and am re-wiring it. The problem is I have a 2 pole generator and no wiring diagram that covers a 2 pole. All the wiring was burnt or disconnected. It is a 6 volt. Any ideas? thanks
Name: Jeff Pinnow
Date Posted: Sep 21, 06 - 2:26 PM
IP Address: 69.19.167.97
Email: sharkey@dm-tech.net
Message: I Just bought a 9n and am re-wiring it. The problem is I have a 2 pole generator and no wiring diagram that covers a 2 pole. All the wiring was burnt or disconnected. It is a 6 volt. Any ideas? thanks
98
9N,2N,8N, Ford Tractors / ford 9n
« on: March 05, 2007, 02:00:08 PM »
Subject: ford 9n
Name: Shaun Hansen
Date Posted: Sep 19, 06 - 9:26 PM
IP Address: 12.207.35.248
Email: shmc@mchsi.com
Message: Hello,
We recently bought a used ford 9n and i have a question about a shifting lever that we do not know what it is for. I do not see it on other 9n's. just curious to why that is. The lever is on the left side of the transmission as if you were sitting on it. and it is located right buy the steering arm. What does that do and why does my tractor have it and others do not. Is is specialty 9n.. thanks shaun
Name: Shaun Hansen
Date Posted: Sep 19, 06 - 9:26 PM
IP Address: 12.207.35.248
Email: shmc@mchsi.com
Message: Hello,
We recently bought a used ford 9n and i have a question about a shifting lever that we do not know what it is for. I do not see it on other 9n's. just curious to why that is. The lever is on the left side of the transmission as if you were sitting on it. and it is located right buy the steering arm. What does that do and why does my tractor have it and others do not. Is is specialty 9n.. thanks shaun
99
9N,2N,8N, Ford Tractors / Say No to Sundowner Tractor Company
« on: March 05, 2007, 01:58:24 PM »
Subject: Say No to Sundowner Tractor Company
Name: scorned2
Date Posted: Sep 6, 06 - 9:27 PM
IP Address: 68.82.248.203
Email: scorned@hotmail.com
Message: No Sundowner Tractor Company
I recently lost $360.51 as a result of doing business with Sundownter Tractor Company. If anyone else has similar issues, I suggest they report these issues to the Better Business Bureau. I would stay clear of them. Customer Service is outrageous. Owner pays more attention to her personal life than taking care of her business life. Owner refuses to hold herself accountable for her actions and blames problems on everyone else for her mistakes, ie Manufacturer, customer, service technician.
Name: scorned2
Date Posted: Sep 6, 06 - 9:27 PM
IP Address: 68.82.248.203
Email: scorned@hotmail.com
Message: No Sundowner Tractor Company
I recently lost $360.51 as a result of doing business with Sundownter Tractor Company. If anyone else has similar issues, I suggest they report these issues to the Better Business Bureau. I would stay clear of them. Customer Service is outrageous. Owner pays more attention to her personal life than taking care of her business life. Owner refuses to hold herself accountable for her actions and blames problems on everyone else for her mistakes, ie Manufacturer, customer, service technician.
100
9N,2N,8N, Ford Tractors / Trying to locate my 9N Serial Number
« on: March 05, 2007, 01:56:56 PM »
Subject: Trying to locate my 9N Serial Number
Name: Tony Russell
Date Posted: Sep 5, 06 - 3:59 PM
IP Address: 24.26.137.98
Email: trussell70@hotmail.com
Message: Greetings. I am the new owner of a Ford 9N and trying to locate the serial number as there are no papers for this tractor. Trying to determine the year and features, etc.
I found a four-digit number *1273* on the left side of the engine block near the starter mounting location. But I am not certain this is the right place. A buddy told me it should have the prefix 9N before the serial number.
Any help is appreciated.
Thanks,
Tony
trussell70@hotmail.com
Name: Tony Russell
Date Posted: Sep 5, 06 - 3:59 PM
IP Address: 24.26.137.98
Email: trussell70@hotmail.com
Message: Greetings. I am the new owner of a Ford 9N and trying to locate the serial number as there are no papers for this tractor. Trying to determine the year and features, etc.
I found a four-digit number *1273* on the left side of the engine block near the starter mounting location. But I am not certain this is the right place. A buddy told me it should have the prefix 9N before the serial number.
Any help is appreciated.
Thanks,
Tony
trussell70@hotmail.com
101
9N,2N,8N, Ford Tractors / early 9n's
« on: March 05, 2007, 01:55:31 PM »
Subject: early 9n's
Name: Stuart
Date Posted: Jul 16, 06 - 7:07 PM
IP Address: 208.60.224.150
Email: davenport6_1941@bellsouth.net
Message: Hi,
I found a 9n with the smooth cast rear hubs this weekend and was wondering what eles I needed to look for to see how early it is and correct. I know abut the serial number, but was wondering about other little clues. Can anyone help? How long did they make the 9n's with the smooth rear hubs?
Thanks,
Stuart
Name: Stuart
Date Posted: Jul 16, 06 - 7:07 PM
IP Address: 208.60.224.150
Email: davenport6_1941@bellsouth.net
Message: Hi,
I found a 9n with the smooth cast rear hubs this weekend and was wondering what eles I needed to look for to see how early it is and correct. I know abut the serial number, but was wondering about other little clues. Can anyone help? How long did they make the 9n's with the smooth rear hubs?
Thanks,
Stuart
102
9N,2N,8N, Ford Tractors / 9N electric question
« on: March 05, 2007, 01:54:47 PM »
Subject: 9N electric question
Name: Ron
Date Posted: Apr 30, 06 - 5:38 PM
IP Address: 66.82.9.70
Email: landyacht79@yahoo.com
Message: I have a 9N that is not starting. It was converted to 12 volts before I got it. I have replaced the plugs, points, condenser. Does anyone know what the resistance of both sides of the coil should be? Also what should the resistance of the series resistor be?
Name: Ron
Date Posted: Apr 30, 06 - 5:38 PM
IP Address: 66.82.9.70
Email: landyacht79@yahoo.com
Message: I have a 9N that is not starting. It was converted to 12 volts before I got it. I have replaced the plugs, points, condenser. Does anyone know what the resistance of both sides of the coil should be? Also what should the resistance of the series resistor be?
103
9N,2N,8N, Ford Tractors / hey quick question
« on: March 05, 2007, 01:53:20 PM »
Subject: hey quick question
Name: Martin Barnes
Date Posted: Apr 26, 06 - 1:55 AM
IP Address: 149.151.181.117
Message: I'm having some serious porblems with my tractor.
Willing to commission for repairs.
Please call 862-226-9611 and ask for Martin. Thanks!
Replies:
Name: Martin Barnes
Date Posted: Apr 26, 06 - 1:55 AM
IP Address: 149.151.181.117
Message: I'm having some serious porblems with my tractor.
Willing to commission for repairs.
Please call 862-226-9611 and ask for Martin. Thanks!
Replies:
104
9N,2N,8N, Ford Tractors / need some help on my good ol' 9n
« on: March 05, 2007, 01:51:38 PM »
Subject:
Name: Rickey orrick
Date Posted: Apr 25, 06 - 12:52 PM
IP Address: 204.184.61.253
Email: redneckorrick@YAHOO.COM
Message: how many plows will a 9n pull? how many horse is it, and
can you use a 9n with a blade to push down brush? oh ya, my 9n has a problem not wanting to charge the battery. evrey time i start it i have to use jumper cables and my truck. any sugestions on why the engin won't charge the battery? what should i do try to charge it?
Name: Rickey orrick
Date Posted: Apr 25, 06 - 12:52 PM
IP Address: 204.184.61.253
Email: redneckorrick@YAHOO.COM
Message: how many plows will a 9n pull? how many horse is it, and
can you use a 9n with a blade to push down brush? oh ya, my 9n has a problem not wanting to charge the battery. evrey time i start it i have to use jumper cables and my truck. any sugestions on why the engin won't charge the battery? what should i do try to charge it?
105
9N,2N,8N, Ford Tractors / start up
« on: March 05, 2007, 01:48:53 PM »
Subject: start up
Name: bob keefer
Date Posted: Apr 21, 06 - 3:55 PM
IP Address: 24.229.176.102
Email: bobkeef1@ptd.net
Message: Just got two 9ns
one will not turn over, trying to losen it up will marval oil, little bit at a time
the other turns over, but no start going to rebuild carb and new plugs
Any tips?
Name: bob keefer
Date Posted: Apr 21, 06 - 3:55 PM
IP Address: 24.229.176.102
Email: bobkeef1@ptd.net
Message: Just got two 9ns
one will not turn over, trying to losen it up will marval oil, little bit at a time
the other turns over, but no start going to rebuild carb and new plugs
Any tips?